30 Gallon, 200 psi Horizontal Volume Short Tank

This 30-gallon horizontal volume tank is ASME rated. Measures 18 in O.D. x 31 in L. Foot brackets: 3 in H. Special interior and exterior coatings can be quoted to meet your specifications. Available in carbon steel shop primer, carbon steel powder coated blue, stainless steel, and fully configured. Maximum working pressure: 200 psi.


PLEASE NOTE: The product is currently unavailable. Please see SKU 302469 for a suitable alternative.


This low-pressure air receiver is built in accordance with the ASME Section VIII Division I code latest addition. This model is 7 inches shorter in length than SKU 302469 but offers the same volume. Vessels are "U" stamped and registered with National Board. Four tanks of different materials, finishes, and configurations are listed below. Quotes for special interior and exterior coating options available.

SKU 304946 304946-SS 304946-PC-BL01 KT-TANK-30H or
Volume 30 gal 30 gal 30 gal 30 gal
Cubic Feet 4 4 4 4
Material Carbon Steel 304/304L Stainless Steel Carbon Steel Carbon Steel or
304/304L Stainless Steel
Exterior Finish Standard Shop Primer Aluminum Oxide Blast Powder Coated Blue Standard Shop Primer or
Aluminum Oxide Blast
Interior Finish As Welded, Unfinished As Welded, Unfinished As Welded, Unfinished  As Welded, Unfinished
Working Pressure (psi) 200 200 200 200
Operating Temperature ≤400°F -20°F to +200°F ≤400°F ≤400°F or
-20°F to +200°F
O.D. 18 in 18 in 18 in 18 in
Length 31 in 31 in 31 in 31 in
Square Feet 13.2 13.2 13.2 13.2
Weight 97 lb 111 lb 99 lb 111 lb or 125 lb
Additional Equipment Tank Only Tank Only Tank Only • In-tank check valve, 30 CFM, 450 psi max
• 200 psi ASME relief valve
• 300 psi pressure gauge
• Brass ball valve on outlet
• Manual tank drain
• Miscellaneous fittings and connectors