Remote Inline Filter Quick Disconnect Kit


Did you purchase a small compressor (like an MCH6) from another manufacturer without filtration and now regret it? Designed to reduce contaminates introduced into airgun systems or scuba tanks, the remote inline air quick disconnect filter kit connects between your compressed air source and the destination cylinder. Includes a 3-foot whip and spare quick disconnect adapters. Choose between industrial grade (drying) air filter and CGA Grade E breathing air filter.


Kit Features Includes:

  • Personal Filter Body
  • 3 ft Whip with Quick Disconnect
  • 1/4" Brass Female End Plug Open Flow Hose Coupling | 6537K11
  • Choice of Industrial Drying Air (SC000340-M) or Tri-Chem Breathing Air (SC000340-MHC) Filter Elements
  • Spare Adapters for Reconfiguring Filter to User's Needs
    - 1/4" Brass Female Open Flow Quick Disconnect | 6537K73
    - #4 JIC x 1/4" Male NPT Steel 90° | 822-4-4

For proper filtration, do not fill tanks rapidly as this small filter is made to handle 6-7 CFM air flow. The filter element is clear with litmus paper and should be checked visually for remaining filter life regularly.

Filter Element Warnings

DO NOT drop filter into housing.
DO NOT use where operating temperature could exceed 120°F (49ºC). Use of a temperature alarm is recommended.
HEAT & HUMIDITY shorten filter life.
DO NOT introduce large slugs of water into filter.
BLOW all lines and parts clear prior to installation.
DO NOT use where pressure surges are likely.
DO NOT use in system without earth ground.
REMOVE all protective seals and closures.
NOT FOR use in aircraft.
ALWAYS follow standard operating procedures (SOP) for producing breathing gases.
MAXIMUM USEFUL LIFESPAN is six months. Shelf life is two years.