Our online checkout is temporarily disabled for maintenance. Please continue to browse the site and add items to your cart. To complete your order, please call +1-805-815-4044 Monday–Friday from 8:00am to 5:00pm Pacific Time
Replacement CO2 Sensor
$994.40
Replacement carbon dioxide (CO2) sensor for the following Nuvair Pro CO2 analyzers: SKU 9603, 9604-LB 9615-LB, 9615.5-LB, 9616, 9617, 9635, and 9641-NV.
SKU
9616-SEN
Specifications
| Flow Rate | 0.6-1 L/min |
|---|---|
| Resolution | 50 ppm resolution from 0 to 1000 ppm, then 100 ppm up to full scale |
| Repeatability | ± 2% of full scale @ 68°F (20°C) ambient |
| Linearity | At ambient temperature and pressure: ± 2% FSD or ± 10% of the reading, whichever is greater |
| Sensor Type | NDIR (Non-dispersive infrared) |
| Expected Sensor Life | 5-10 years based on analyzer handling and use. Check sensor accuracy frequently with test gas and attempt to recalibrate if reading is inaccurate. Replace sensor if recalibration fails. |
| External Thread Size | M 16X1 |
| Replacement Procedure | According to the manufacturer, the sensor can be replaced by the user. It is generally not necessary to recalibrate the unit. After replacement the user should check the full scale value of the sensor and the unit to ensure proper operation. |
| Range | 0-2000 ppm |
| Operating & Storage Temperature | -4° to +122°F (-20° to +50°C) |
| Operating Humidity | 0 to 95% rh, non-condensing |
| Weight | 0.2 oz (6 g) |
| Warranty | 12 months |
* All specifications are at ambient/sea level, 77°F (25°C) and are subject to change without notice. Calibration must be confirmed with a calibration CO2 test gas.
WARNING: Never expose gas sensors to pressure or you may cause damage and/or false readings. Damaged sensors will not provide accurate gas analysis. Most gas analyzers can be used to analyze a regulated gas sample flow, the contents of a gas cylinder, or the flow from a regulator. The flow rate of gas must equal 1-5 L/min. To produce this flow, a Flow Restrictor and Regulator may be required. A faulty Flow Restrictor can lead to a false analyzer reading. Flow Restrictors should be regularly tested with a Flow Meter. Inaccurate gas analysis can lead to serious personal injury or death.
Check items to add to the cart or
