Skip to the beginning of the images gallery

Aluminum Reducing Regulator: 6000 psi In MNPT > 0-5000 psi Out FNPT

$239.00

Anodized aluminum reducing regulator with maximum rated pressure: 6000 psi (414 bar). Outlet pressure range: 0-5000 psi (0-345 bar). Outlet pressure rating: 5000 psi (345 bar). The model 1120 is a small, piston type, hand load regulator available in an outlet pressure range of 0 to 5000 psi (0-345 bar) with a single inlet and outlet port. It is available with a hex head adjusting bolt and lock nut for single set pressure use or with the same adjusting hand knob. It can be panel mounted using either the upper 1.25" threaded section and lock nuts or the lower 1" jam nut. It uses an unbalanced poppet design for ruggedness and simplicity. There is a small variation of control pressure with changing inlet pressure as noted in the specifications. A 20 to 30 micron filter in the poppet cartridge prevents damage by contaminants.

SKU

1120

Details

Specifications

Type	Hand load reducing regulator
Special Features	Single outlet
Maximum Rated Pressure	6000 psi (414 bar)
Outlet Pressure	0-5000 psi (0-345 bar)
Outlet Pressure Rating	5000 psi (345 bar)
Body Ports	1/4" MNPT - inlet at the bottom centerline 1/4" FNPT - outlet on the side as shown
Flow coefficient (Cv)	0.06 (equals 0.07 in orifice)
Outlet Pressure Variation with Inlet Pressure	70 psi rise/1000 psi inlet drop
Leakage	Bubble Tight
Weight	14.1 oz (400 g)
Overall Length	6 in (15.24 cm)
Hex Diameter	1-3/8 in
Minimum Temperature	-15°F (-26°C)
Body Material	Anodized Aluminum
Internal Materials	Brass Stainless
Seal Materials	Kel-F Viton