From $2.50
To $27.98
At Nuvair, we custom fabricate breathing air hose and hose ends. We cut the length of our 3/8" 250 psi (17 bar) working pressure breathing air hose to your specification and install hose ends that you select. The cost of installing hose ends is included in the purchase price. The K313AY-06 hose is designed for breathing air applications. When pressurized, this hose is positively buoyant (floats) in fresh and salt water.
K313AY-06 is a 3/8" lightweight, kink-resistance low pressure breathing air hose. Rated at 205 psi (17 bar), this hose has a clean, non-contaminating thermoplastic core tube and abrasion resistant cover. Meets MIL-H-2815 off-gassing requirements. Recommended hose ends: FS6X4 or MPT6X4-LF.
K313AY-06 is a low-pressure hose that meets MIL-H-2815 off-gassing requirements. To order hose without hose ends, see SKU K313AY-06 (3/8" 250 psi Yellow Diving Hose).
SKU | K313AY-06 |
Nominal | 3/8" |
I.D. |
.375" |
O.D. | .625" |
Cover Material | Phthalate Free Yellow Flexible PVC Compound |
Core Material | Phthalate Free Food Grade Clear Flexible PVC Compound |
Working Pressure | 250 psi @ 70°F |
Minimum Burst Pressure | 1000 psi @ 70°F |
Compliance Notes for Air Breathing
When properly coupled with suitable fittings, this hose will satisfy the air supply line requirements for Type C respirators, as described in 30 CFR Part 11, Subpart J, 11.124-7, including the gasoline permeation test. This hose will also satisfy the “off-gassing tests”, as described in MIL-H-2815 F, Section 3.12.2 and 4.5.10.
Please note that NIOSH only certifies complete breathing respirators and does not issue certifications on individual components such as hoses. All replacement hoses for NIOSH-certified apparatus must have prior certification as part of that unit.
For a full listing of hose end choices, see RELATED PRODUCTS (below).
SKU NO-END Select this option if you do not want a hose end installed on Hose End #1 and/or Hose End #2. If chosen, the selected hose end/s will ship bare. |
PLEASE NOTE: Custom cut hose and hose ends are special order items and are not returnable and are non-refundable. For additional information see our RETURNS POLICY. For assistance with ordering custom hose and hose ends, or if your application requires "fractional foot" ordering (hose lengths that are not in one-foot increments, i.e. 14-foot, 7-inch hose length), please contact the Nuvair sales team.