The Pro H2O Analyzer measures moisture (H2O) levels in gases in the range of 0 to 500 parts per million (ppm). The analyzer is designed to either verify H2O concentration in stored gas cylinders or monitor continuous compressor gas flow. Extend the service life of air filtration systems by monitoring excessive moisture levels. Sample manifold sold separately. Choose from two power and two module options.
Designed for installation on a compressor control panel or other flat surface, the Nuvair Pro H2O Alarm panel mount analyzer measures moisture levels in breathing gas mixtures or air. Audible and visual alarms for low and high moisture content can be set by the user. If the alarm sounds, the analog output can activate an optional relay that shuts down compressors automatically, sounds a remote alarm, or activates an emergency backup system. Sample manifold sold separately.
Adding the FAILSAFE Module to your Nuvair Pro Alarm analyzer will automatically disable integrated power equipment if: (a) Analyzer power is interrupted, or (b) Analyzer goes into alarm. Adding a SMART START Module to your Nuvair Pro Alarm Analyzer will automatically power-up the analyzer in tandem with integrated power equipment, like a compressor.
Choose one of two available power options and two available module upgrades by using the Power & Module Options dropdown menu (above).
|Display Range||0–500 ppm|
|Display Accuracy||5 ppm + 9% from measured value|
|Expected Sensor Life||3 years|
|Power (Voltage / Frequency)||110V or 220V / 50 or 60 Hz|
|Operating Temperature||–40° to 158°F (–40° to 70°C)|
|Storage Temperature||–40° to 140°F (–40° to 60°C)|
|Relative Humidity Range||0–100%|
|Pressure||0 to 80 bar|
|Dimensions (L x W x H)||4 × 2 × 5.5 in (10.1 × 5 × 14 cm)|