The Nuvair Pro He Alarm panel mount analyzer measures helium (He) in a mixed gas. Includes two user-set audible and visual alarms for high and low helium percentages, and an analog output for automatic compressor shutdown (with optional relay). Compatible with heliox and trimix. Two power and two module options available.
Designed for installation on a control panel or other flat surface, the Nuvair Pro O2 panel mount alarm analyzer measures helium levels in mixed gases. Two audible and visual alarms for low and high helium content can be set by the user. If the alarm sounds, the analog output can activate an optional relay that shuts down compressors automatically, sounds a remote alarm, or activates an emergency backup system. Does not require calibration. Can be used as a continuous reading analyzer while mixing gas.
WARNING: Never expose gas sensors to pressure or you may cause damage and/or false readings. Damaged sensors will not provide accurate gas analysis. Most gas analyzers can be used to analyze a regulated gas sample flow, the contents of a gas cylinder, or the flow from a regulator. The flow rate of gas must equal 1-5 L/min. To produce this flow, a Flow Restrictor and Regulator may be required. A faulty Flow Restrictor can lead to a false analyzer reading. Flow Restrictors should be regularly tested with a Flow Meter. Inaccurate gas analysis can lead to serious personal injury or death.
Two power options are available for this analyzer: 110/220V wall plug-in or rechargeable lithium battery. For wall plug-in powered analyzers, two optional modules can be built into your analyzer: FAILSAFE and SMART START.
Adding the FAILSAFE Module to your Nuvair Pro Alarm analyzer will automatically disable integrated power equipment if: (a) Analyzer power is interrupted, or (b) Analyzer goes into alarm. Adding a SMART START Module to your Nuvair Pro Alarm Analyzer will automatically power-up the analyzer in tandem with integrated power equipment, like a compressor.
Choose one of two available power options and two available module upgrades by using the Power & Module Options dropdown menu (above).
|Full Scale Resolution||±2% over full scale|
|Humidity Range||0–90% rh, non-condensing|
|Response Time||<10 seconds for 90% of final value|
|Operating Temperature Range||41–104°F
|Storage Temperature Range||5–122°F
(–15 to 50°C)
|Expected Sensor Life||Up to 10 years under normal circumstances|
|Power Options||· 110/220V Wall Plug-in [International] (SKU 9628-E)
· 800mAh Rechargeable Lithium Battery (SKU 9628-LB)
|Module Options||· Wall Plug-in [International] with FAILSAFE Module (SKU 9628-E-FS)
· Wall Plug-in [International] with SMART START Module (SKU 9628-E-SS)
(L x W x H)
|5.5 × 4 × 2"
(14 × 10 × 5 cm)