Dome Loaded Reducing Regulator · 0-6000 psi Outlet
$202.00
Aqua Environment aluminum dome loaded reducing regulator. 1/4" FNPT fittings. Outlet pressure range: 0-6000 psi. Maximum rated pressure: 6000 psi. The model 1026 is an inexpensive, compact, highly accurate dome load regulator. It is non-venting. It uses the same reliable valve cartridge used in 415 Series regulators. This regulator is about four times as accurate as the 415 spring loaded regulators but requires a separate source of control pressure to the dome.
SKU
1026
Specifications
| Type | Dome Loaded Reducing Regulator |
| PSI Out | 0 to 6000 psi |
| Hand Loaded/Operated or Dome/Air Operated | Dome Loaded |
| Maximum Rated Pressure | 6000 psi |
| Outlet Pressure Range | 0-6000 psi |
| Outlet Pressure Rating | 6000 psi |
| Maximum Control or Dome Pressure | 6000 psi |
| Inlet Port Size | 1/4" MNPT |
| Outlet Port Size | 1/4" FNPT |
| Flow Coefficient (Cv) | 0.05 (equals 0.07 in orifice) |
| Outlet Pressure Variations with Inlet Pressure Variations | 17 psi rise/1000 psi inlet drop |
| Leakage | Bubble tight |
| Control Port Size | 1/4 in MNPT |
| Weight | 11.6 oz (330 g) |
| Overall Length | 5.75-7.0" |
| Hex Size | 1.37" |
| Minimum Temperature | -15ºF |
| Body Materials | Anodized aluminum |
| Internal Materials | Brass, Stainless |
| Seal Materials | Kel-F, Viton |
| Special Note | NOT OXYGEN CLEANED |
Typical Applications
- Automatic control of flow from cascade banks of air, CNG or other fases to portable tanks.
- Supplying seal gases to pump shaft seals.
- Application where it is economical or desirable not to have electric controls, such as in CNG fill stations, where such controls could be a hazard.
- Numerous other applications where a reference pressure is used to control regulator output pressure.
Check items to add to the cart or
