Wired Ceramic Moisture Sensor Transmitter
$1,828.00
FM and CSA certified, low cost, two-wire, intrinsically safe dew point transmitter for continuous measurement of the moisture content in inert gases or safe classified areas. Power can be from any 12 to 28 VDC source. The sensor can be installed directly in a main gas line or in a sample stream. Only periodic recertification is required to maintain calibration accuracy.
SKU
K-EA2
Specifications
| Measurement Range | -148°F to + 68°F (-100°C to +20°C) dewpoint 0 to 3000 PPMv moisture content |
|---|---|
| Accuracy | ±3.6°F (±2°C) dewpoint |
| Power Supply | 12-28 VDC reverse polarity protected |
| Output | 4-20 mA linear, current source configurable over the entire measurement range |
| FM and CSA Certifications | Class I, Division 1, Groups A, B, C, & D T4 hazardous areas |
| Operating Temperature | -40°F to +140°F (-40°C to +60°C) |
| Operating Pressure | Vacuum to 5000 psi |
| Temperature Compensated | From -40°F to +140°F (-40°C to +60°C) |
| Flow Rate | 2 to 10 SCFH (1 to 5 L/min) mounted in sampling block; 0 to 30 ft/sec (0 to 10 m/sec) velocity when inserted directly |
| Connection | Two wire loop powered DIN-style with screw terminal contacts Backward compatibility with 3-wire installations |
| Traceable Certification | -100°F to +68°F dewpoint traceable to NIST. For dewpoints < -100°F, direct reference to a fundamental optical dewpoint hygrometer |
| Environmental Protection | NEMA 4 (IP66) 10μ HDPE Guard (standard) 80μ Sintered Metal Guard (optional) |
| Self Diagnosis | Condition : Output Sensor fault : 3 mA Under-range dewpoint : 3 mA Over-range dewpoint : 23 mA |
| Sampling Cell | SKU K-SSB |
Check items to add to the cart or
PRESEC Visual Filter Element Moisture Indicator · Sale!
was
$903.00
Special Price
$732.00
